How To Boost PlayStation 4?
04/03/2024

In addition to the console booster hardware, you can also use the LagoFast client on your PC to boost your Console, please refer to the following steps:

1. Connect your console (PlayStation4) to the router (as shown in the figure)

E7FA1ECF-FDC1-48ae-BB71-55CAFC54706C.png

 

  • If youre using PS4 wired connection (strongly recommended)

1) Connect your PS4 to the same router as your PC via wired connection

2) Install LagoFast Client on your PC

 

  •  If youre using PS4 wireless connection

1) Search for the router WiFi on PS4 

2) Connect your PC network to the same router as your PS4

3) Install LagoFast Client on your PC

 

Please note:

The optical modem and the set-top box cannot be used as a router to support the console boost (PS4), which will cause Connection Failed.

 

2. Obtain the IP address through LagoFast's PC client

  • Open the LagoFasts PC client and login your account

  • EnterConsoletab > PS

  • Find the console game you want to boost, click it and select your region

  • The parameters shown in the figure below will be displayed in your client with different values. You need save them to activate the console boost network connection later

 

 

detail.png

 

Please be careful not to shut down or let your PC sleep during the boost process.

 

3. Activate the console (PS4) boost Internet connection

  • Home > Settings

1.png

 

  • Settings > Network

2.png

 

  • Network > Set Up Internet Connection

3.png

 

  • Select according to your PS4 network connection type

    (Recommended:Use a LAN Cable)

4-1.png

 

  • Select Custom > IP Address Settings > Manual

5-1.png

 

6-1.png

 

  • Respectively fill in with the IP AddressSubnet Mask, Gateway and DNS youve obtained in Step 2

7-1.png

 

  • After filling in, click Next

8-1.png

 

  • MTU Settings > Automatic

9-1.png

 

  • Proxy Server > Do Not Use

10-1.png

 

 

  • After the above steps, click Test Internet Connection

11-1.png

 

12-1.png

 

  • After the Test Internet Connection results show Successful and it also shows Successful in the LagoFasts PC client, you can start the game!

 

 

4. How to disconnect the console (PS4) boost?

In the IP Address Settings, set it as Automatic. 

13-1.png

This enables your console to automatically obtain the initial IP address to avoid network anomalies after disconnecting the console boost.

 

Was this helpful?
Yes
No
Can't find the answer you're looking for?
Contact us